Before I had a remote for my TV, a remote for my Firestick and a remote for my sound system. After utilising the BP50 as ARC to the optical connection to my sound system I can now control it all from one remote. Great little device.
There has been one speaker damaged and one missing, I haven’t received at least a partial refund for the missing one
Excellent streamer. Did it right of choosing LP10 for my favorite music.
Bestellt, bezahlt und nach einer Woche bekommen. Bedienungsanleitung in Ruhe(!) gelesen, Plattenspieler und Bluetooth-Box im ersten Anlauf ohne Probleme verbunden. Jetzt kann ich meine bis zu 50 Jahre alten Schallplatten drahtlos in Haus und Garten hören. Auch ein USB-A-Stick am entsprechenden Eingang funktioniert einwandfrei. So geht funktionierende Technik! Ein wundervolles Produkt!!
Up2Stream Amp - Multiroom Wireless Streaming Stereo Amplifier Board
sollo una duda con el lp10 no me pude conectar al nas de hechos es un disco duro externo de 1giga de musica que lo conecte en un router con usb
Made mistake when i was ordering Amp plate. Support solved problem in half day, got my plate in couple of days, sounds great, a lot of features, would buy again.
Package received in good condition. However, the A100 unit seems to be a open box item as the inner box is not sealed. Usually, all new items comes with a seal.
Sound quality is decent.
Really enjoying my new H50. Connects to my 8ohm speakers and sounds great. Spotify and TuneIn connectivity is seamless. A good alternative to an old style receiver with limited streaming connectivity.
Setting Favorite buttons for Spotify and TuneIn is pretty convoluted though. Would be preferable to be able to select Spotify or TuneIn and have it play the last song/playlist or station.
Would be nice if the H50 had a sleep mode instead of going through a reboot every time I turn it on.
Ich nutze den Up2Stream Amp Stereo als Ersatz für ein älteres UKW Radio, dessen Empfang immer schlechter wurde. Die Verstärkerleistung ist auch bei 12V Versorgung ausreichend, und die Möglichkeit, den Subwoofer separat mit einem Low-Level Signal anzusteuern (und zu konfigurieren), sowie einen der GPIO Pins zum Schalten eines Relais zu nutzen, sind einfach großartig. Die Einrichtung mittels der ACPWorkbench ist simpel. Perfekt! Jetzt muss nur noch ein Gehäuse her...oder das Board muss in das Subwoofergehäuse.
In general I'm quite satisfied with the amplifier. It sounds great with Polk XT 15 bookshelf speakers. The dedicated sub output also works fine with a Jamo active sub. App control works fine, app could look a little bit better but does the job.
The only issue I experienced is with the ARC input. I use a Philips 50PUS8000 TV and sometimes there are tiny hickups, outages like half a second with the sound. It was great to fix this. I use brand new, high quality & speed HDMI cable to connect the TV and the amplifier. Using the other inputs like line in, DAC, BT doesn't have this problem.
He tenido un problema con el con la APK GoControl y lo han solucionado. Por lo demás el equipo funciona muy bien.
I've never heard a better digital amplifier in this price range. The features are really good, and the performance lives up to the claims. But the best part is the sound. When the components work together, you get really good sound and a lot of fun.
Easy install works as advertised. Hopefully Airplay 2 will come in an update.
Up2Stream Mini - Multiroom Wi-Fi Streamer Board (No Amp)
I’d say great for the price…but no need to qualify that it’s great for price. Just flat out great.
I ordered the LP 10 and it immediately improve the quality of my sound. I did have some problems with the go control app, but consistently had response from customer support and led me to an updated version of the app that solved the problem. The support was wonderful, the product is wonderful.
Easy to Setup and working very well.
One little Problem: when i Switch Songs via Spotify the First second of the Song ist Always Skipped.
Only Happens If i manually Switch Songs.
Up2Stream HD DAC - Airplay 2 High-Res Wireless aptx HD Audio Streaming Board(No Amp)
Works really well for its intended use. Uses mostly Spotify and FLAC playback with and without multiroom and have no complaints. Phone app (4STREAM) is simple but works and easy to use. Firmware version is quite old (20220427) so I get a feeling that the product might not be updated anymore.
Many years ago I invested in a large Denon amp to hook up a kitchen a/v system. Thing is I didn't need most of what the Denon gave me so it was a bit of a pricey overkill. It finally kicked the bucket and when I went looking for a replacement my needs hadn't really changed much. I don't need/want a whole home audio solution but I think it's cool that this device solves the need in the room and is extendable to the rest of the house. It gives a great boost and sound quality to my in ceiling speakers in the kitchen and works flawlessly without needing multiple remotes. Connected an Apple TV to an HDMI splitter, route the audio through optical on the Arylic A50 and out through the kitchen speaker wiring. Well worth the $170 versus another 4-500 for another black box solution.
Ho scelto l’Arylic Up2Stream AMP stereo per pilotare un paio di casse autocostruite e stampate in 3D, con design bass reflex, ed è stata una scelta azzeccata sotto ogni aspetto. Volevo un amplificatore compatto ma moderno, con streaming integrato e flessibilità per l’audio fai-da-te: questo piccolo AMP offre tutto questo, e anche di più.
Installazione semplice, streaming immediato
L’installazione è stata veloce: pochi cavi, alimentazione, casse collegate, e via con l’app 4STREAM. L’interfaccia è chiara, e in pochi tocchi ero già connesso a Spotify, Amazon Music, AirPlay, DLNA e persino Bluetooth 5.0. Supporta anche Ethernet per una connessione più stabile.
Suono eccellente, personalizzabile con DSP integrato
Le casse che uso sono stampate in 3D, con condotto bass reflex e componenti di buona qualità. Già suonavano bene, ma l’Up2Stream AMP le ha portate a un altro livello. Il suono è chiaro, potente e ben bilanciato, con bassi profondi, medi precisi e alti brillanti.
La vera sorpresa è il DSP integrato, accessibile via app o tramite software dedicato. Permette di regolare equalizzazione, filtri crossover, loudness, bilanciamento e altro ancora. Questo è un vero vantaggio per chi vuole ottimizzare il suono in base all’ambiente o alle caratteristiche delle proprie casse DIY.
Streaming ad alta risoluzione e grande compatibilità
Supporta file audio fino a 24-bit/192 kHz, con compatibilità per FLAC, WAV, APE, ALAC e altri formati lossless. L'integrazione di Amazon Music nell'app è comoda e funziona in modo stabile, perfetta per chi ha già un abbonamento.
Conclusione
L’Arylic Up2Stream AMP è molto più di un semplice amplificatore stereo: è una piattaforma audio completa, flessibile e perfettamente adatta a progetti DIY. Con le casse stampate in 3D con bass reflex si comporta in modo eccellente, e grazie al DSP integrato, puoi personalizzare completamente il suono per adattarlo al tuo stile d’ascolto.
🔧 Perfetto per maker, appassionati di audio e progetti fai-da-te, lo consiglio senza esitazione a chi cerca qualità, compattezza e controllo.
Review of Up2Stream Mini - Multiroom Wi-Fi Streamer Board (No Amp)
Simply connect the Up2Stream mini to the DIN 5 pole Tape/Phono input found on all vintage radios from 60‘s, 70‘s and beyond. Add 5 volt power ( I used a Power Bank). Done!
A 5-Pin DIN Plug to 3.5 mm Stereo Jack Plug Audio Cable are available for a few dollars/Euros.
Add a remote control for even easier use of your vintage unit.
I assume I can turn off the LED. If not, that should be an option or automatic dimming after time. Internal mount possible for the adventurer, but my post is about a quick way to add digital very for low cost and effort.
A USB C connection would be a great option as it is getting harder to find the USB Micro cables.
