How To Transmit Sound To Your Bluetooth Headphone

This guide explains how to use the Bluetooth Transmitter feature on your Arylic streamer to connect to Bluetooth headphones or speakers.

Before You Start

1. Your Arylic streamer is powered on.

2. Your Bluetooth headphones are powered on and in pairing mode.

3. The streamer firmware is up to date (recommended).

Connection Steps

1. Put your Bluetooth headphones into pairing mode and place them close to the Arylic streamer.

2. Make sure the streamer is in any mode except Bluetooth Input mode.

3. Enable Bluetooth Transmitter mode by pressing the reset button once, or by opening the Go Control App and tapping the Pairing button.

4. When the indicator light turns solid, the connection is complete.

After Connection

Once connected, the streamer will:

1. Send audio wirelessly to your Bluetooth headphones or speakers.

2. Continue playing audio from the selected source, including Wi-Fi, line-in, or streaming services.

3. Automatically reconnect to the last paired Bluetooth device when available.

Notes

1. Some Arylic streamers support connecting to two Bluetooth devices at the same time.

2. Audio latency may vary depending on the headphones and Bluetooth codec.

3. Some Bluetooth headphones exit pairing mode automatically. Re-enable pairing mode if they are not found.

Troubleshooting Tips

1. If your headphones are not found, make sure they are in pairing mode and try again.

2. Keep the headphones close to the streamer during pairing.

3. Disable Bluetooth on nearby phones or devices to avoid interference.

4. Restart the streamer and try again if the connection fails.