GO CONTROL APP – Device Setup Guide

Step 1: Install the App

1. 📱 Download GO CONTROL APP from App Store (iOS) or Google Play (Android).

2. 🔄 Open the app and sign in or create an account, or you can skip for the quick setup.

Step 2: Power On Your Device

1. 🔌 Make sure your speaker or amplifier is powered on.

2. 🔵 Ensure the device is in pairing mode:

   • Most Arylic devices automatically enter pairing mode on first power-on.

   • LED indicator will slow blink.

Step 3: Connect Your Phone to Wi-Fi

1. 🌐 Make sure your phone is connected to the 2.4GHz Wi-Fi network (not 5GHz).

2. 🔒 Note your Wi-Fi SSID and password.

Step 4: Add Device in GO CONTROL

1. ➕ Open the app → Tap “+” on the top right.

2. 🛠 Select your device.

3. 📶 Follow on-screen instructions to connect the device to your Wi-Fi:

   • Enter your home Wi-Fi and password.

Step 5: Confirm Connection

1. ✅ Device LED stops blinking (steady light) → Wi-Fi connected.

2. 📱 App will show device online.

3. 🔊 Test playback via app to ensure audio is streaming.

⚡ Tips & Troubleshooting

• Use 2.4GHz Wi-Fi only; 5GHz not supported.

• If device fails to connect:

  • Power cycle the device.

  • Move closer to the router.

  • Reset device and repeat steps.

• Make sure phone and device are on the same Wi-Fi network.