Connect To Wi-Fi (4STREAM)
Overview
This guide will walk you through the steps to connect your Arylic device to your Wi-Fi network for the first time using the 4STREAM App. Once connected, you can enjoy wireless streaming from your favorite music services.
Before You Start
Make sure you have:
-
Your Arylic device powered on and within range of your Wi-Fi router
-
A smartphone or tablet (iOS or Android) connected to the same Wi-Fi network you want to use
-
The 4STREAM App installed:
Tip: For best performance, we recommend using a 2.4GHz Wi-Fi network.
Step-by-Step Guide
1. Power on your device
-
Plug in the power adapter and turn on your Arylic device.
-
Wait for the LED indicator to blink slowly (indicating it’s in setup mode).
2. Open the 4STREAM App
-
Launch the 4STREAM App on your phone/tablet.
-
If this is your first time, allow the app to access your location and local network (required for device discovery).
3. Add your device
-
Tap the "+" icon or "Add Device" in the app.
-
The app will scan for nearby Arylic devices.
-
Select your device from the list.
4. Connect to your Wi-Fi
-
Enter your Wi-Fi network name (SSID) and password.
-
Tap "Next" and wait for the device to connect.
-
Once connected, the LED will stop blinking and stay solid.
5. Test the connection
-
Play a song from Spotify, Tidal, or your local library via the app.
-
If music plays without interruptions, your setup is complete.
Troubleshooting
If your device doesn’t connect:
-
Make sure you are using a 2.4GHz network (5GHz is not supported on some models).
-
Keep your device within 5 meters of the router during setup.
-
Restart your device and try again.
-
If the LED is not blinking, reset the device by holding the RESET button for 5 seconds.
- Arylic L series are not available to use 4STREAM APP.
