How to Pair the BK01 Bluetooth Controller?

This guide will walk you through pairing your BK01 Knob Controller with your Arylic device.

Before You Start

Make sure that:

- Your Arylic audio device is powered on

- The BK01 Knob Controller has power

Pairing Steps

1. Place the BK01 close to the Arylic device you want to pair with.

2. Press and hold the ▷ button until the indicator enters Pairing Mode
(all indicators flashing).

3. When the indicators turn solid, pairing is complete.

4. Press ▢ to switch modes and confirm the pairing was successful.

After Pairing

Once paired successfully, you can use the BK01 to:

- Adjust volume

- Play / pause music

- Switch tracks or sources

- Instantly control linked Arylic devices

Troubleshooting Tips

- If pairing fails, make sure other Arylic devices nearby are powered off, then try again.

- Keep the BK01 close to the device during pairing.

- Confirm that your Arylic device supports BK01.

Products Supported

A30+, A50+, B50, BP50, S10+, SA100
Up2Stream Mini, Up2Stream Pro, Up2Stream Amp
Up2Stream Amp 2.1, Up2Stream Plate Amp 2.1
Up2Cast Amp

Products Not Supported

S50 Pro+, H50, H400, HA400, LP10, M50
Up2Stream HD DAC, Up2Stream Amp Sub
WBC65