Connect to Your Speaker (Wired)

1️⃣ Streamer or Preamp → Active Speaker / Amplifier

(Arylic S10+, LP10, S50 Pro+, BP50, BR10)

• Choose cable: RCA (red/white) 3.5mm AUX, or optical cable.

• Connect: Streamer output → Speaker/Amplifier input.

• Select input on amplifier (if applicable).

• Test audio & adjust volumes.

2️⃣ Banana Plugs → Speaker

(Arylic H50, B50, A100)

• Prepare cables with banana plugs.(10-18 AWG)

• Connect speaker terminals: Red = +, Black = –.

• Connect to amplifier outputs.

• Secure connections.

• Power on & test audio.

3️⃣ Phoenix (Euroblock) → Speaker

(Arylic A50+)

• Strip cable ends & insert into phoenix connector.

• Tighten screws to secure wires.

• Connect phoenix block to amplifier terminals (red = +, black = –).

• Check connections.

• Power on & test audio.

⚡ Tips

• Always match polarity: Red = +, Black = –.

• Keep connections tight and secure.

• Avoid tangled cables & interference.

• Gradually increase volume to protect speakers.