ACPWorkbench – Step-by-Step Guide

Purpose: Manage and configure Arylic devices, stream audio, and update firmware.

Step 1: Install ACPWorkbench

1. 🖥 Download ACPWorkbench from your order by email.

2. 💻 Install the software on your PC (Windows supported).

3. 🔄 Open ACPWorkbench.

Step 2: Connect Your Device

1. 🔌 Power on your Arylic device.

2. Connect to the Arylic device by USB data cable.

3. When detected, you will see the audio effect panel is available for configuration.

⚡ Tips & Troubleshooting

• Must use the data cable.

• If a device is not detected:

  • Power cycle the device.

  • Check firewall/security settings.

  • Restart ACPWorkbench.

• Always backup device settings before firmware updates.