Name: Mono Amplifier for DIY Up2Stream Amp Mono
Brand: arylic
SKU: U2S-AMPM
Price: 99.0 USD
Availability: InStock

Mono Amplifier for DIY Up2Stream Amp Mono

DESCRIPTION
SPEC
Q & A
REVIEWS

Wireless Your Mono speaker

More Powerful! 100 Watts Mono Amplifier

Are you working in a project in some area, commercial buildings, elevators or DIY projects that only need one speaker but with high amplification? Our Mono Amplifier can get the job done! It can output a maximum 100W in Mono channel which is perfect for such situation.

High Power Stereo System

You can combine 2 AMP Mono to form a stereo system with 200W power in total. It is also very easy to setup. Just 2 steps and you can enjoy your music with high power stereo system.
More Extension

There are both Digital output (I2S) and Analog output (DAC) for you DIYers to be able to connect other amplifiers to extend the music power.

PC support and Tuning Tool

Supports connection to PC through micro USB to act as external DAC, also you can use our ACPWorkbench to customize the different frequency and equalizer settings for your favorite music.

Whole House Party System

With a little tweak you can pair AMP Mono with a stereo amplifier to become a 2.1 channel amplifier, put multiple devices in rooms of your house and you are ready to host a enjoyable and fun house party!

Stream All Music you Like

Stream your favorite online music such as Spotify, Amazon Music(US Only), Tidal, Deezer, Qobuz, Internet Radio, iheartRadio, Napster etc. Any time anywhere in your house with our 4stream App.

What's More

Specification

USER INTERFACE & CONTROLS LED indicators White-WiFi & network mode: Flashing fast-device is booting Flashing slow- waiting for WiFi connection Green-Line in mode Red-USB mode Yellow-connect to PC Power Button Device on: Short press once: Switch input mode Long press once: Switch off Short press twice: Disconnect current WiFi connection and enter paring mode (WiFi mode) Short press three times: Restore the factory settings Device off: Short press: Switch on PC iTunes/Musicbee/Foobar 2000 4stream App Free iOS and Android App	AUDIO Music Format FLAC/MP3/AAC/AAC+/ALAC/APE/WAV Audio Decode Up to 24bit/192kHz Audio Output 44.1khz/16bits, CD quality Frequency Response 20Hz-20kHz THD+N <0.03% @1kHz/1W/4ohm SNR 91dB Speaker Impedance Stereo 4-8Ω Mono 2-8Ω Speaker Power Stereo Mode 2×50-W into a 4-Ω BTL Load at 21V 2×15-W into a 8-Ω BTL Load at 15V 2x15W@8Ω + 30W@4Ω m BLT load at 15V Mono Mode 100-W into a 2-Ω BTL Load at 24V 60-W into a 4-Ω BTL Load at 21V 30-W into a 8-Ω BTL Load at 18V Online Music Service Check here Local Storage Mobile device memory, NAS, USB pen drive/Stick	GENERAL Weight 0.5kg Dimensions 1108022mm Working temperature 0~40℃ Package Included Main board x1 Antenna x2 User's manual x1 Screw Driver x1 4pin Phoenix Connector x1
	CONNECTIVITY Wifi IEEE 802.11 b/g/n 2.4G Bluetooth 5.0 SBC/AAC, 10M Wired Connection Ethernet RJ45 Streaming Protocols AirPlay, DLNA, UPnP, Spotify connect, Qplay	INTERFACES DC input 12V-24V Audio input 3.5mm mini jack（1Vrms） Line in(pin) Micro USB Input x1 for PC streaming Audio output Speaker out (Pin space 5.0mm) Analog Stereo(pin) Analog Mono(pin) Spdif out (PIN) USB Host For USB pen drive/stick, 1000 songs limited Antennas WiFi/Bluetooth Signal Compatible Expansion Board ADC-KEY Board SPDIF Input Board SPDIF Output Board Volume knob Board IR Extension Board (need to use with ADC-key board)

Specification

USER INTERFACE & CONTROLS LED indicators White-WiFi & network mode: Flashing fast-device is booting Flashing slow- waiting for WiFi connection Green-Line in mode Red-USB mode Yellow-connect to PC Power Button Device on: Short press once: Switch input mode Long press once: Switch off Short press twice: Disconnect current WiFi connection and enter paring mode (WiFi mode) Short press three times: Restore the factory settings Device off: Short press: Switch on PC iTunes/Musicbee/Foobar 2000 4stream App Free iOS and Android App	Power Button Device on: Short press once: Switch input mode Long press once: Switch off Short press twice: Disconnect current WiFi connection and enter paring mode (WiFi mode) Short press three times: Restore the factory settings Device off: Short press: Switch on PC iTunes/Musicbee/Foobar 2000 4stream App Free iOS and Android App
AUDIO Music Format FLAC/MP3/AAC/AAC+/ALAC/APE/WAV Audio Decode Up to 24bit/192kHz Audio Output 44.1khz/16bits, CD quality Frequency Response 20Hz-20kHz THD+N <0.03% @1kHz/1W/4ohm SNR 91dB Speaker Impedance Stereo 4-8Ω Mono 2-8Ω Speaker Power Stereo Mode 2×50-W into a 4-Ω BTL Load at 21V 2×15-W into a 8-Ω BTL Load at 15V 2x15W@8Ω + 30W@4Ω m BLT load at 15V Mono Mode 100-W into a 2-Ω BTL Load at 24V 60-W into a 4-Ω BTL Load at 21V 30-W into a 8-Ω BTL Load at 18V Online Music Service Check here Local Storage Mobile device memory, NAS, USB pen drive/Stick	GENERAL Weight 0.5kg Dimensions 1108022mm Working temperature 0~40℃ Package Included Main board x1 Antenna x2 User's manual x1 Screw Driver x1 4pin Phoenix Connector x1
CONNECTIVITY Wifi IEEE 802.11 b/g/n 2.4G Bluetooth 5.0 SBC/AAC, 10M Wired Connection Ethernet RJ45 Streaming Protocols AirPlay, DLNA, UPnP, Spotify connect, Qplay	INTERFACES DC input 12V-24V Audio input 3.5mm mini jack（1Vrms） Line in(pin) Micro USB Input x1 for PC streaming Audio output Speaker out (Pin space 5.0mm) Analog Stereo(pin) Analog Mono(pin) Spdif out (PIN) USB Host For USB pen drive/stick, 1000 songs limited Antennas WiFi/Bluetooth Signal Compatible Expansion Board ADC-KEY Board SPDIF Input Board SPDIF Output Board Volume knob Board IR Extension Board (need to use with ADC-key board)

Download

Want to get a 30 to 50% discount on this item?
Why Not! Just write a review and let us know after your purchase.

To Know More here.

QUESTIONS & ANSWERS

Ask a Question

Since a couple of days I have a problem with synchronized play. I have 2 Mono Amps, with the latest beta software. When playing synchronized, the amp which acts as a slave after a while begins to malfunction, sound the slave unit stops playing, then starts playing (faltering). If I change the master/slave situation then again the (new) slave has the problem

Please update your both devices to the newest firmware and use the newest app.
You can follow the instructions below:
https://forum.arylic.com/t/new-4stream-app-and-firmware-upgrade-4-6-328252/890
Salve, devo ristrutturare casa e vorrei realizzare un sistema multi-room: - stanza da letto con 2 altoparlanti passivi da 50W non collegati tra loro - cucina con 2 altoparlanti passivi da 30W non collegati tra loro - soggiorno 2 altoparlanti passivi da 100W non collegati tra loro I diffusori sono collegati alla rete di alimentazione, quale prodotto mi consigliate? Grazie

Grazie per le informazioni.
Per la camera da letto, puoi scegliere Up2stream Amp V4 o A50+.
Per la cucina puoi scegliere Up2stream Amp V4 o A30+.
Per il soggiorno puoi scegliere 2*Up2stream Amp mono per ottenere 100W per ogni canale.
Puoi scegliere prodotti fai da te se vuoi risparmiare il budget, potresti aver bisogno di alcuni accessori qui per i prodotti fai da te.
I have an unusual situation. I want to site 2 classic hi-fi speakers either side of a big stone feature and it is impossible to run a cable between them or a cable back to a single pre-amp. Both positions do have mains power. Can you propose a system using your products to solve the problem? I’m imagining a wireless connection to both speakers that works in stereo. Thank you

By this, I advice your can have a Up2stream Mini V3 receiver board to each speakers then group in our app.
After setup, set one as left channel then set another as right channel in the app.
Can I connect the Volume knob board to the encoder plug on the mono board and control volume that way?

Yes, you can connect encoder volume knob to the (GPIO1 GPIO2 GND ...) JACK
Can you stream one bluetooth or line input to multiple AMP monos simultaneously? Does it have delay?

Hello
you can achieve the goal through multi room mode, you stream Bluetooth or line in to the master device, and the slave device will get the streamer from the master one, because the data transfer through wireless so the delay depends on the transfer delay
Supply how much, V + - and watts if the device >mono amplifier< is only used as a source for the SPDIF module >SPDIF Out Board

SPDIF OUT Board don't need supply on amp mono
I'm wondering what is the power in mono mode 26 V / 6 A in 8 ohms ???

about 60 watts
What is the difference between Up2Stream Amp Mono and Up2Stream Amp V4. Apparently there is no difference.

it's same board but controller by a swtich to change mono and stereo.
If we set up two different devices as left and right channel, how will this appear in Spotify Connect? Will it appear as a single device that I can choose? Thank you

hello, you can make use of multiroom mode to achieve your idea, in this case, you only need to stream music to the master device ,so in spotify, you only need to select master device to play music
Hello, It seems there is an IIC connector. Is it possible to drive the AMP mono board with arduino for on/off, volume, previous/next,led functions...?

the i2c connecter is reserved for the display expansion board
Hello, Is it possible to define the BT name of the board?

the bt name of the board is same as your device name, you can define your device name by 4STREAM APP
Hello, Is a APTX BT?

sorry, this type of board dosen't support aptx
Hello. How do you switch on/off the Amp mono?

you can use the ir remote, and you also can use the stand by button to let it deep sleep
Is it possible to get a chassis to put the board in?

you can refer to this page https://www.arylic.com/products/up2stream-case
How do you use two mono amplifiers in a stereo set-up? And is it real left/right stereo?

You can set up two different devices as left and right channel outputs by grouping multiple rooms
blutooth and dac chip type?

both are MVbp1064
How is volume controlled in up2stream mono amp ?

Same as stereo .by IR,remote controller or app .

●It is extendable by expansion boards.

*5G WiFi compatiable means users could control our system when your smartphone connected to your router's 5G channel.

* About Spidif Pins, Up2stream Mini/Pro is default as Spdif out. Up2stream Amp/Mono is default as Spdif in. You can switch to Spdif In/Out by ACPWorkbench Tool. The 2 spdif pins are the same funtion, can't change seperately.

*Up2stream Amp SUB and S50 Pro+ Preamp is our coming up new products.

Customer Reviews

5.0 Based on 5 Reviews

5 ★

100%

4 ★

3 ★

2 ★

1 ★

Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

09/02/2021

Zoran V.

Serbia

DIY Wifi Speakers

I have purchased these amps in order to turn my old passive Pioneer speakers into Wifi speakers. With on-off-on switch I managed to create double input on speakers so now they can be used as before connected to my old amp or as a Wifi speakers connected to Up2Stream amp. I have also added battery power and turned them to completely wireless speakers when used with Up2Stream amps.

Mono Amplifier for DIY Up2Stream Amp Mono

05/23/2021

D***e

Ordered 3 amplifiers, one of them came with a defect, did not work the power button. The seller sent a similar amplifier at his own expense. I checked everything, everything works well! Seller recommend! The only nuance, this is a large power supply, twice as much as the amplifier itself. Before Khabarovsk, the parcel came in 12 days

Mono Amplifier for DIY Up2Stream Amp Mono

03/25/2021

S***h

A good device, but when used in a pair of two boards, there is a surround effect.

Mono Amplifier for DIY Up2Stream Amp Mono

01/15/2021

Jessika J.

very good seller I recive very fast shipment thanks

Mono Amplifier for DIY Up2Stream Amp Mono

01/02/2021

Timmy M.

very fast shipping. Only 13 days from China to Germany! I waited for this mono board a couple of months. Now it is finally available. I think it is the best board you can buy if you have a mono or stereo system. It offers WIFI BT for wireless inputs and USB Ethernet AUX for wired input. I recommend to order the board with Remotecontrol. the Remotecontrol offers also a lot of options. My faviourite one is the deep bass function. with that the bass gets enhanced very good. Moreover if you buy the ACPWorkbench Software from Arylic you can apply some effects and you can set some EQ parameters. Very good Job Arylic!!!

Mono Amplifier for DIY Up2Stream Amp Mono