ACPWorkbench Tuning Tool

I like the easy use of ACPWorkbench. Also the user interface itself is decent and well-structured.However, when used with the Up2stream Pro V4, it lacks a dedicated delay function to independently adjust latency for the left and right channels. Additionally, the Up2stream Pro V4 exhibits a noticeable noise floor (background hiss), which is particularly audible through the tweeter via my amplifier board.
Furthermore, the analog input signal level (AUX in) on the Up2stream Pro V4 is relatively low compared to Bluetooth or Wi-Fi playback.
It is also somewhat disappointing that the Up2stream Pro V4 features only a single AUX output, despite the underlying DSP/chipset natively supporting two output channels.
Overall, I am satisfied with the hardware, but I definitely see untapped potential for further improvement.

I had a little issue with the licence but asking the support to reset it it worked now fine!

O aplicație extrem de utilă. Am BP50 care este deasemenea un device foarte versatil. Cu acpw am transformat bassul din subwoofer. Foarte multe opțiuni o aplicație care merită cu siguranță banii

This tool gives access to loads of internal settings of the connected equipment, however I spent some time using it to use PEQ with Arylic A100.
- I could get 10 band PEQ settings on ACPWorkbench
- Different custom PEQ groups could be saved and changed/applied through this tool
- Connectivity was easy with USB cable
* Best part of it is that you can simply apply PEQ in-time and see the effect live. You can tweak the PEW settings in real-time.
I could verify the effect with REQ real time.
Super easy to add DSP to A100..... simply excellent!

I'm very happy with the Up2stream Pro. I have it connected via line-out and also with a coaxial cable directly to the SPDIF pin on my old Onkyo TX-DS 575 X.
I usually use the digital connection since it gives me better results on my amplifier.
You can do a lot with ACPWorkbench, and I like it. I still have a lot to learn.
I've noticed that when I connect it to my PC via USB to use ACPWorkbench, it actually becomes the PC's default audio output, but on the Up2stream Pro, the SPDIF output stops working; the signal only goes to the amplifier through the line-out.
In the app, the SPDIF tab appears with a yellow lock and a red cross. I assume this is normal. I'll try it via the serial interface.
I've turned my old amplifier into an internet radio and I'm converting my CDs to FLAC to put them on my NAS and listen to them via DLNA with the Up2stream Pro.
I'm very happy with the device
Thanks.

Great and quick answer to reactivate my ACP workbench, very happy

**Excellent customer support and a great experience!**

I purchased the Arylic ACPWorkbench software some time ago. After experiencing a computer problem, I was unable to activate the software again because my original license key had already been used.

I contacted Arylic customer support and received a quick and helpful response. They provided me with a new activation code, and I was able to get ACPWorkbench running again.

As an electronics enthusiast, I really appreciate companies that continue to support their customers after a purchase.

Thank you, Arylic, for your excellent service and professional support. Keep up the good work!

tuning works quite wel

Good product overall once you work out what everything does.

Some settings don't persist on reboot, but nothing too serious.

Works great

Ich baue die Geräte gerne in grössere Audio-Anlagen. Dabei verwende ich z.b.
zentral ein Traco 12V Netzteil für mehrere Geräe anstelle von mehreren Stecknetzteilen. Jedoch das Arylic BP50 hat Tonstörungen mit einem solchen Netzteil. Vieleicht könnte das verbessert werden?

Made mistake when i was ordering Amp plate. Support solved problem in half day, got my plate in couple of days, sounds great, a lot of features, would buy again.

Several years after purchasing ACPWorkbench app I upgraded my PC and app didn't work anymore. I contacted customer support and everything was solved with one email. Perfect!

ACPWorkbench Tuning Tool

ACPWorkbench Tuning Tool

The product allows you to fine-tune the parameters of Linkplay compatible products. However, the license is only valid on one version of Windows installed, if you reinstall Windows on the same machine, the license is lost, it's too bad, IMHO

I have two items from Arylic and I love them both!!! Soon there will be third.

support is great and the hardware is very well implemented, I did obtain a good result. It will be better , still , if one could edit /add the web radios.

ACPWorkbench Tuning Tool

Super klang.
Super Funtionalität. Spotify, Amazon music, Bluetooth etc funktioniert super.
Mit ACPWorkbench hat man alles was man braucht um die Anlage perfekt einzustellen (Vorausgesetzt man weiß, was man tut)
Habe 3 verschiedene Geräte im Einsatz

Ein Stern Abzug, weil die Lautstärke Abstufung für mich zu groß sind. Wäre schön, wenn man die Abstufung einstellen könnte.
Bei einer Gartenparty hat ich ein paar Aussetzer beim Multiroom. Kann natürlich an einer schlechteren WLAN Verbindung liegen. Ich teste weiter.

I know this amp is designed for the back of a boombox but i am using it in an standard 2.1 system. Mounted it in the subwoofer box. Works good and overall super handy with the two apps and the tuning software. I would like some indicator lights showing power and source but that is specific for my application. I am putting together source lights but rather it be built in. Anyway a really nice and flexible amp. And having WiFi is so much better then Bluetooth. Worth it just for that.

Thks for your installing MCP software

I am very satisfied with sound, quality of complete product. Not have any problems with use, and no reclamation from customers!

Dieses Modul kommt bei mir in einem großen 2.2 (zwei Subwoofer parallel auf 2 Ohm verschaltet) Lautsprecher zum Einsatz, der meine Scheune/Werkstatt beschallt - und das macht der Amp absolut hervorragend auch bis in wirklich unangenehm hohe Pegel. Die Funktionvielfalt in Kombination mit der ACPWorkbench-Software ist gigantisch. Das Feintuning ist zwar nicht mal eben in ein paar Minuten gemacht, das Ergebnis entschädigt am Ende aber definitiv für den Aufwand. Zwei kleine Verbesserungsvorschläge: Ein integrierter Netzschalter mit Kontrollleuchte wäre wünschenswert. Ebenso ist es leider echt mühsam, direkt auf dem Board Kabel zur Spannungsversorgung anzubringen. Die externe DC-Buchse macht in vielen Anwendungsfällen leider keinen Sinn, so dass man gezwungen ist, auf dem Board zu löten. Hier wären ein paar Print-Schraubterminals ein echter Segen. Ansonsten: Respekt für die Entwicklung dieses tollen Moduls. Genau das, was ich gesucht habe!

Very pleased with both. The quality of the streaming and amp are clearly beyond average bluetooth standards, and the workbench makes it possible to tune it to your drivers and environment. My only criticism is that the ACPWorkbench could use better documentation. You can find most of the answers you need on various forums, but it takes some digging.

easy to install and setup - the only point we miss: on/off switch

ACPWorkbench Tuning Tool